QA Tech II-Concrete NACE or AMPP Certified - #1408145
Thompson Pipe Group
Date: 3 weeks ago
City: Grand Prairie, TX
Salary:
$25
-
$35
per hour
Contract type: Full time
QA Tech II Description:
Who We Are
Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous.
Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all North America. Please visit our website at www.thompsonpipegroup.com
Thompson Pipe Group is currently looking for a Quality Technician. Hourly rate of $25.00 to $35.00 based on experience.
Hours:6AM - 4:30PM Overtime Required / may work some saturdays .
The Quality Assurance Technician will work within the Quality department and alongside Production Operations to ensure the highest level of quality for Thompson Pipe Group – Pressure products. The position will collaborate with various departments within the facility to ensure knowledge of, and compliance with, project-specific quality assurance requirements.
Responsibilities
Question about the Position? You can contact us at 469-313-2469
EOE/AA – M/F/Vet/Disability
Thompson Pipe Group – Pressure is an Equal Opportunity Employer
Who We Are
Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous.
Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all North America. Please visit our website at www.thompsonpipegroup.com
Thompson Pipe Group is currently looking for a Quality Technician. Hourly rate of $25.00 to $35.00 based on experience.
Hours:6AM - 4:30PM Overtime Required / may work some saturdays .
The Quality Assurance Technician will work within the Quality department and alongside Production Operations to ensure the highest level of quality for Thompson Pipe Group – Pressure products. The position will collaborate with various departments within the facility to ensure knowledge of, and compliance with, project-specific quality assurance requirements.
Responsibilities
- Working as part of dynamic team, Audit and Inspect raw materials, in process, and final product to ensure compliance with applicable project requirements
- Perform Visual Coating Inspections
- Perform or Witness Testing of Various Coatings
- Maintain records of all quality, test, and inspection reports, including: Concrete and Mortar Strength reports
- Under the supervision of the QA Supervisor, monitor all aspects of product Quality
- Identify, document, and report all non-conforming conditions
- Sample, Test, Report, and Evaluate tests conducted on Cement Mortar Coating
- Sample, Test, Report, and Evaluate tests conducted on Steel Tensile Strength
- Sample, Test, Report, and Evaluate tests conducted on Small and Large Aggregates
- Identify, Support, Report and Evaluate Joint Assembly Test reports
- Audit, Review and Validate production reports
- Review material certifications/test reports on component materials to assure compliance with project requirements
- Assist Production personnel who have been assigned quality control responsibilities.
- Ensure compliance with any additional or special quality assurance procedures required by project specifications
- Perform other duties as assigned
- Current NACE Level 2 or NACE Level 3 / AMPP Certified Coating Inspector or Senior Certified Coating Inspector
- Current “American Welding Society” Certified Welding Inspector, “AWS”-CAWI, or CWI, or SCWI
- Non-Destructive testing, Current or Previous ASNT-TC-1A certification to Level 1, 2, or 3. Certification in one or more of the following disciplines: PT, MT, UT.
- Knowledge of concrete technology, ACI certification is a plus.
- Prior training in Welding and Nondestructive Evaluation/Testing (NDE/NDT).
- High school diploma or general education degree (GED).
- Previous experience in a Manufacturing setting, Quality Assurance or Production.
- Proficient in the Microsoft Office suite of applications.
- Bilingual in English and Spanish.
- Top-tier Medical, Dental, and Vision Benefits
- Life and Supplement Life
- Company Matched 401K Retirement Plan
- Paid Holidays
- Fun Events
- Training and Development
- Employee Discounts
- Career Opportunity!
Question about the Position? You can contact us at 469-313-2469
EOE/AA – M/F/Vet/Disability
Thompson Pipe Group – Pressure is an Equal Opportunity Employer
How to apply
To apply for this job you need to authorize on our website. If you don't have an account yet, please register.
Post a resumeSimilar jobs
Product Development Chemist, Entry Level
PPG,
Grand Prairie, TX
1 week ago
As the Chemist , you will lead new developments in polymeric materials for Aerospace Transparencies. You will use their experiences to build new developments to expand PPG’s Aerospace Transparency capabilities. If you are passionate about developing technologies, then this may be the opportunity for you! You will report to PPG offers excellent Medical, Dental, & Vision Benefits; matching 401k +...
Manufacturing Planner, Associate
Lockheed Martin,
Grand Prairie, TX
1 week ago
You will be the Manufacturing Planner Associate for the Missiles and Fire Control team in Arlington. Our team is responsible for supporting the contractual execution of various contracts, including Development, Production, and Post Production. What You Will Be Doing As the Manufacturing Planner Associate, you will be responsible for the scheduling and Bill of Materials (BOM) planning in the Production,...
Program Specialist (Licensing - Selma)
Texas Racing Commission,
Grand Prairie, TX
2 weeks ago
The Texas Racing Commission Occupational Licensing Program Specialist will perform highly advanced (senior-level) which will involve team leader responsibilities in the transformation of the current licensing program and involves work in support of or at times, physical presence in one of four field offices. Program work involves administering, monitoring, and evaluating the development and operation of an occupational licensing program...
